How to Fix a Running Toilet

  1.   Open the tank. Reach in and push down the flapper. If the water stops running, that means   that the flapper needs to be replaced.
  2.   Shut off the water supply. Flush and drain the water in the tank.
  3.   Remove the flapper.
  4.   Take the old one to the hardware store to make sure you buy the right one.
  5.   Follow the installation instructions.
  6.   Adjust the chain so that the flapper lies flat, with just a little slack.

Note: If the water doesn’t stop running when you push down the flapper, it may mean that the water level in the tank is too high. The water level should be about ½ inch BELOW the plastic drain pipe.

If the running does not stop and all else fails – call a plumber.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s